We will be closed Wed. 9/9 through Fri. 9/11! Ordering will resume on Sat. 9/12. Expect delays in processing and shipping of orders. We appreciate your support and cooperation!

2007-2014+ Gen IV LS3 Based Standalone Harness w/ 4L60/65/70e -- H403 - Image 4

2007-2014+ Gen IV LS3 Based Standalone Harness w/ 4L60/65/70e -- H403 - Image 6

2007-2014+ Gen IV LS3 Based Standalone Harness w/ 4L60/65/70e -- H403 - Image 7

2007-2014+ Gen IV LS3 Based Standalone Harness w/ 4L60/65/70e -- H403 - Image 8

2007-2014+ Gen IV LS3 Based Standalone Harness w/ 4L60/65/70e -- H403 - Image 9

2007-2014+ Gen IV LS3 Based Standalone Harness w/ 4L60/65/70e — H403

Name: 2007-2014+ Gen IV LS3 Based Standalone Harness w/ 4L60/65/70e -- H403
SKU: H403
Price: 700.00 USD
Availability: InStock

$700.00

SKU: H403 Category: Gen IV (58x) Stand Alone Harnesses Tags: 4L60e, 58x, 8403, E38, Gen 4, H403, L76, l77, LS3, ls3 standalone

Product Description

Application

2006-2007 Corvette, 2008-2013 Corvette 6.2, 2010-2014 Camaro, 2008-2009 Pontiac G8, 2007 (New Body Style) -2014 Vortec Truck 4.8, 5.3, 6.0, and 6.2.

2014+ 6.0 applications that originally had an E78 ecm will need to be moved to an E38 ecm and older throttle body!

Description

Our Gen IV LS3 standalone harness is designed for installing these new GM EFI engines into your ride, whatever it may be. This swap harness is specific for 2007-2014 Gen IV 58x engines with a Drive by Wire (Electronic) Throttle Body, EV6 Injectors, and a 4L60e, 4L65e, or 4L70e Transmission. This harness will work for 4.8-6.2 engines! Including the Vortec Truck Engines.

Why BP Automotive?

GM color-coded TXL wire to meet or exceed OEM standards
We only use OEM Aptiv (Formerly Delphi), Kostal, Bosch, Molex, and Yazaki connectors, seals, and terminals
Connector Position Assurance Locks (CPA Locks)
Sliding Delphi Grommet that can be positioned on the main harness line to seal your firewall.
5 foot long from the rear passenger side of the intake
PCM can be mounted inside the passenger compartment or the engine bay
OEM fuse block with all covers, labeling, and splash guards for a long-lasting weather-resistant installation

Connections Included in this Standalone Harness

Throttle Body (6 Pin)
Oil Pressure
Coolant Temperature Sensor
Alternator/Generator
All 8 Injectors with EV6 Injector Connectors
Bank 1 Coil Harness Connector
Bank 2 Coil Harness Connector
Bank 1 & Bank 2 Knock Sensors
Camshaft Position Sensor
4L60e Transmission Connector
Speed Sensor
Bank 1 Upstream Oxygen Sensor
Bank 2 Upstream Oxygen Sensor
Mass Air Flow
IAT (Only If Choosing Speed Density)
MAP Sensor
Crank Position Sensor
A/C Pressure Sensor
OBD II Port (DLC Port)
Harness Ground
Single Battery Constant Connection
Accelerator Pedal

Connections From Our Harness You Will Need to Hookup

Fuel Pump (Required)
Switched Ignition (Required)
Malfunction Indicator (Check Engine, MIL, CEL, ETC.)
Speedometer
Tachometer
Fan 1 Relay Control (Low Speed or Single Control)
Fan 2 Relay Control (High Speed or Second Fan Control)
Brake Switch Signal

Additional Info

Our LS swap harnesses also require the removal of the VATS and emissions systems from the ECM. BP Automotive offers this service as well. This harness also requires the use of an E38 ECM and a T42 TCM, which can also be purchased from BP Automotive.

h403 h-403 8403